Submersible pump entirely in AISI 304 stainless steel and open vortex impeller, which can be used in fixed and mobile installations.
The RIGHT electric pump is also available with a float switch that allows for wide use.
For further technical information see the Databook
• Handling of soiled liquids containing solid and/or filamentary substances in suspension
• Emptying of seepage water
• Handling of dirty wastewater (sanitary)
• Emptying of cesspits and discharge to sewers
| Flow rate | Up to 18 m³/h |
| Total head | Up to 9.5 m |
| Max. temperature of the liquid | +50°C |
| Poles | 2 |
| Max. solids passage | 35 mm |
| Insulation class | F |
| Protection degree | IPX8 |
| Voltage | Single-phase 1~230V ± 10% Three-phase 3~400V ±10% |
| Max. immersion | 7 m with 10 m cable 2 m with 5 m cable |
| Pump body | Stainless steel AISI 304 (EN 1.4301) |
| Impeller | Stainless steel AISI 304 (EN 1.4301) |
| Shaft | Stainless steel AISI 303 (EN 1.4305) (part in contact with liquid) |
| Mechanical seal | upper part in Carbon/Ceramic/NBR (motor side) lower part in Silicon Carbide/NBR (pump side) |
