Submersible pump with vortex or dual-channel hydraulics and impeller, also available with float switch. Its peculiarity is the wide free passage, which is the same as the discharge diameter, which can be 50 or 65 mm depending on the model.
Piping connections are:
• threaded 50DAR
• flanged 65DAR
Continuing the tradition and the importance that EBARA gives to the pump's lifespan, the mechanical seals and the motor are in oil bath which allow cooling and better lubrication of the bearings.
Supplied with standard 10-metre cable.
For further technical information see the Databook
• Emptying of cesspits, soiled liquids collection pits and settling pits
• Pumping of soiled liquids with suspended solids
• Pumping of soiled liquids in domestic and industrial environments ideal for installation in domestic and residential lifting stations
| Flow rate | Up to 42 m³/h |
| Total head | Up to 10 m |
| Max. temperature of the liquid | + 25°C partially submerged pump + 35°C totally submerged pump |
| Poles | 2 |
| Max. solids passage | 50 - 65mm |
| Insulation class | F |
| Protection degree | IPX8 |
| Voltage | Single-phase 1~230V ± 10% Three-phase 3~400V ±10% |
| Max. immersion | 7 m with 10 m cable |
| Pump body | Cast iron |
| Impeller | Stainless steel AISI 304 (EN 1.4301) |
| Shaft | Stainless steel AISI 316 (EN 1.4401) |
| Mechanical seal | 50DAR: Impeller side: Graphite/Ceramic Motor side: NBR sealing ring 65DAR: Impeller side: Silicon Carbide/Ceramic Motor side: NBR sealing ring |
