Self-priming centrifugal pump in AISI 304 steel with a special hydraulic system including a Venturi unit (ejector and diffuser) that can suck water up to 8 metres deep.
Suitable for residential applications: gardening and irrigation.
Lightweight and easily transportable, small in size.
For further technical information see the Databook
• Domestic pressurisation
• Pressure boosting in general
• Garden irrigation systems
• Vehicle washing
• Handling of clean water
| Flow rate | From 0.3 to 4.5 m³/h |
| Total head | From 11.5 to 49 m |
| Max. working pressure | 6 bar |
| Max. temperature of the liquid | 45°C |
| Max. suction depth | 8 m |
| Poles | 2 |
| Insulation class | F |
| Protection degree | IP44 (IP55 on request) |
| Voltage | Single-phase 1~230V ±10% Three-phase 3~230/400V ±10% |
| Pump body | Stainless steel AISI 304 (EN 1.4301) |
| Impeller | Stainless steel AISI 304 (EN 1.4301) for JE PPO reinforced with glass fibres for JES |
| Shaft | Stainless steel AISI 303 (EN 1.4305) (part in contact with liquid) |
| Mechanical seal | Ceramic/Carbon/NBR (standard) |
| Motor support | Stainless steel AISI 304 (EN 1.4301) |
