Cast iron self-priming centrifugal pump equipped with Venturi unit (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to its low weight.
The AGA-AGC self-priming pump installed on a flat, well secured surface allows for an installation of up to 8 metres.
Suitable for residential applications: garden irrigation, vehicle washing and clean water handling in general.
Lightweight and easily transportable, small in size.
For further technical information see the Databook
• Domestic pressurisation
• Small-scale garden irrigation
• Washing of vehicles
• Handling of clean water in general
| Flow rate | from 0.3 to 9.6 m³/h |
| Total head | From 16.5 to 68 m |
| Max. working pressure | 6 bar for AGA 0.60-0.75-1.00 10 bar for the rest of the range |
| Max. temperature of the liquid | 45°C |
| Max. suction depth | 8 m |
| Poles | 2 |
| Insulation class | F |
| Protection degree | IP44 |
| Voltage | Single-phase 1~230V ±10% Three-phase 3~230/400V ±10% |
| Pump body | Cast iron |
| Impeller | PPE+PS with glass fibres for AGA 0.60-0.75-1.00, brass for the rest of the range |
| Shaft | Stainless steel AISI 303 (EN 1.4305) (part in contact with liquid) |
| Mechanical seal | Ceramic/Carbon/NBR (standard) |
| Motor support | Aluminium for AGA 0.60-0.75-1.00, Cast iron for the rest of the range |
