Product Code: SP0358
Status: Stocking
Circulators with integrated electronic control with permanent magnet rotor with possibility of continuous adjustment of operation according to the system's real demands. Applied for the circulation of hot and cold water in air conditioning and heating systems and solar systems.
Circulators with integrated electronic control with permanent magnet rotor that differ from standard fixed speed circulation pumps by allowing continuous adjustment of operation according to the real demands of the system, obtaining significant savings in electrical energy and a reduced noise level.
For further technical information see the Databook
• Circulation of hot and cold water
• Centralised, domestic air conditioning and heating systems
• Constant or variable flow solar systems where optimisation of the operating point is required
| Flow rate | from 0.6 to 3.6 m³/h |
| Total head | From 0.7 to 8.0 m |
| Max. working pressure | 10 bar |
| Max. ambient temperature | 0 ÷ +40°C |
| Max. temperature of the liquid | -10°C ÷ +110°C |
| Insulation class | F |
| Protection degree | IP44 |
| Voltage | Single phase 1~230V |
| Max. glycol quantity | 20% |
| Min. suction pressure | 0.05 bar at 50°C 0.4 bar at 80°C 1.1 bar at 110°C |
| Pump body | Cast iron with cataphoretic coating |
| Impeller | Technopolymer |
| Shaft | Ceramic |
| Rotor can | Stainless steel AISI 316 (EN 1.4401) |
