Ego 2 (Tech)

Product Code: SP0360

Status: Stocking

The cast iron Ego 2 circulators, with integrated electronic control and permanent magnet rotor, supplied as standard with insulation casing and new display, are pumps suitable for circulating hot and cold water in domestic centralized heating and air conditioning systems. New motor technology allows it to achieve the best efficiency rating in its category (less than 0.12).

The cast iron Ego 2 circulators, with integrated electronic control and permanent magnet rotor, supplied as standard with insulation casing, are pumps suitable for circulating hot and cold water.

Compared to the other circulators in the range, the Ego 2 and Ego 2 Tech have several new features:

• New motor technology gives them the best efficiency rating in their category (less than 0.12), while maintaining high performance and also ensuring excellent reliability;
• The new front display from which you can monitor various functions;
• New plug for easy electrical connections during installation;
• The new operating modes for the Ego 2 Tech, namely auto mode, constant pressure mode and night mode, designed to increase energy savings.

Heating systems

The pumps are suitable for single-pipe, double-pipe, underfloor heating systems and mixing loops in large systems. All Ego circulators automatically and autonomously control the differential pressure, adjusting pump performance according to heating needs.

For further technical information see the Databook

• Circulation of hot and cold water
• Centralised, domestic air conditioning and heating systems
• Constant or variable flow solar systems where optimisation of the operating point is required

Technical data

Flow rate from 0.8 to 4 m³/h
Total head From 1.2 to 8 m
Max. working pressure 10 bar
Max. ambient temperature 0 ÷ +40°C
Max. temperature of the liquid -10°C ÷ +110°C
Insulation class F
Protection degree IP44
Voltage Single phase 1~230V
Max. glycol quantity 20%
Min. suction pressure 0.05 bar at 50°C
0.4 bar at 80°C
1.1 bar at 110°C

Materials

Pump body Cast iron with cataphoretic coating
Impeller Technopolymer
Shaft Stainless steel AISI 420 (EN 1.4028)
Rotor can Stainless steel AISI 316 (EN 1.4401)
Submit a review

Similar Products

Stay always updated and don't miss our news!

Copyright @ 2023 [TTC PUMP AND MECHANICAL EQUIPMENT JOINT STOCK COMPANY] All rights reserved