.jpg)
-2.jpg)
Product Code: SP0296
Status: Stocking
Standardised cast iron monobloc centrifugal pump with AISI 304 impeller for MD and cast iron impeller for MMD, with 2 and 4 poles motors with high energy efficiency. Equipped with a Back pull-out design that allows the motor block to be removed without having to disconnect the piping body for maintenance.
Standardised cast iron monobloc centrifugal pump with AISI 304 impeller for MD and cast iron impeller for MMD, with 2 and 4 poles motors with high energy efficiency.
The MD and MMD electric pumps feature a back pull-out design that allows the motor block to be removed without having to disconnect the piping body for maintenance.
For further technical information see the Databook
• Heating, ventilation and air-conditioning systems
• Water supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation for farms, sports facilities
• Washing systems
| Flow rate | Up to 600 m³/h |
| Total head | Up to 92,7 m |
| Max. working pressure | 10 bar |
| Max. temperature of the liquid | -5°C ÷ +90°C -5°C ÷ +110°C for H, HS, HW, HSW versions -5°C ÷ +120°C for E version -10°C ÷ +90°C for MMD |
| MEI | > 0.4 |
| Poles | 2 and 4 |
| Insulation class | F (B for high temperature) |
| Protection degree | IP55 |
| Voltage | Three-phase 3~230/400V ±10% (up to 4 kW included) Three-phase 3~400/690V ±10% (from 5.5kW and above for MD) (from 7.5kW and above for MMD) |
| Pump body | Cast iron |
| Impeller | AISI 304 (EN 1.4301) for MD Cast iron for MMD |
| Shaft | Stainless steel AISI 304 (EN 1.4401) for MD Stainless steel AISI 420 (EN 1.4021) for MMD |
| Mechanical seal | MD = Ceramic/Carbon/NBR MMD = Silicon Carbide/Silicon Carbide/NBR H = Graphite/Ceramic/FPM HS = Silicon Carbide/Silicon Carbide/FPM HW = Tungsten Carbide/Tungsten Carbide/FPM HSW = Silicon Carbide/Tungsten Carbide/FPM E = Graphite/Ceramic/EPDM |
| Motor support | Cast iron |
(4).jpg)
-MD_MMD(4).jpg)
